|
|
|
 |
Fluid Power and |
|
Motion Control System |
|
|
|
|
| HyPneu
V9.0 is a program that allows the designer to develop a graphical representation of a
hydraulic system. HyPneu processes the information in the graphical circuit and allows the
user to assign specific components to the system, to run both steady state and dynamic
simulations of the system, and display the results in a meaningful manner. Frequency and
Thermal analysis add-on packages are also available. |
|
|
|
|
|
|
|
|
HyPneu V9.0--Hydraulic and Pneumatic Analysis |
|
| Components
Design |
| Use HyPneu's
generic models (e.g., springs, dampers, mass, friction, orifices, load, etc.) to develop
any component model desired without programming. In addition, you can create your own
mathematical models to be used by HyPneu. Or, you may use a combination of the HyPneu
models and your own models. HyPneu features permit this unique component design to be
stored as a new sub-system. This sub-system can be enhanced through the addition of other
components to form the system desired. |
|
|
| System Analysis--
Dynamic & Steady State |
| System
designing is like putting a puzzle together. Using HyPneu, the vast majority of your
puzzle pieces are at your finger tips. The building blocks available to you through this
powerful software, make the task of system design enjoyable as well as comprehensive.
Creative designs can be stored to form the basis for future designs to save an increasing
amount of time and money. Solve big system design problems with a little computer |
|
|
| Critical Operations
Analysis |
| The fear of
overlooking crucial instabilities in critical operations can become a thing of the past by
using HyPneu. An engineer's nightmare can be in the form of water hammer, limit cycles,
unintended dithering, or end of stroke impact. Using HyPneu, these problems will be
apparent during your computer analysis-before resources are used to build and install
components. |
|
|
| Create your own
Models |
Make use of the
super icon features to graphically create models without programming.
Use the proprietary HyPneu Scripting Language Interpreter (HPSLI) to formulate control
signals and component models that are not included in the standard package. |
| Explore the
flexibility that the HyPneu user's Model Add-on provides to the demanding model developer
by using easy to follow programming procedures. The model you create will be in a DLL
format that is upward compatible with future versions of HyPneu. |
|
|
[Top of this page] |
|
|
|
Thermal
Analyzer |
|
| The ability to predict the temperature of circulating fluid at any point
in the system, along with the temperature of the components in a hydraulic circuit at the
design stage, are crucial to service assurance. Temperature that is either too low or too
high will potentially cause excessive performance degradation and component malfunction.
HyPneu can directly perform dynamic and steady state thermal analysis using any circuit
created schematically. Not only can HyPneu evaluate pressure and flow in a fluid power
system, but it can also assess the temperature profile of the fluid and components under
any work cycle. |
|
|
[Top of this page] |
|
|
|
Frequency Analyzer |
|
| Frequency
Response Analysis |
| In many systems, frequency response is a significant design
consideration. With the introduction of HyPneu, it is no longer necessary to perform
time-consuming and complicated (even unreasonable) mathematical model derivation. Now, all
of these can be performed with a single key stroke without involving transfer function
formulation. Certainly if a transfer function is available, HyPneu is perfectly capable of
using it. Frequency analysis can even become enjoyable, not burdensome. |
|
|
| Frequency Power Analysis |
| The minimization of vibration and noise in the operation of a fluid power
system is a very critical design and maintenance goal. The causes of erratic motion of
actuators and vibration of connecting lines can be a nightmare to spot. Directly from the
circuit schematic, HyPneu identifies these sources of noise and vibration using the Power
Spectral Density (PSD) technique. This technique evaluates a signal such as pressure using
a narrow band analysis swept over a broad band of frequencies. HyPneu is an extremely
useful tool to assure a smooth and noise free hydraulic system. |
|
|
[Top of this page] |
|
|
|
HyPneu Linx |
|
|
|
[Top of this page] |
